WE MAKE HOLSTERS COMPATIBLE WITH ALL ALIGN TACTICAL OPTIONS
SEE BELOW
ALIGN TACTICAL
 |  |  |  |  |
|---|---|---|---|---|
 |  |  |  |
USPSA Approved
“Are you ready?” for clearing stages faster than ever with your CANIK Upgrade to the ultimate performance components for the NEW USPSA Limited Optics, as well as Limited, Limited 10, and Open divisions.
Master Recoil
The Align Tactical® THUMB REST LOCKING BLOCK PIN integrates an ergonomic ledge for the support hand's thumb to firmly lock down against, serving as a brake against muzzle flip to provide the fastest follow-up sight picture. Increased surface contact with the pistol practically eliminates support hand slippage while providing an index point for an aggressively consistent high thumbs-forward grip. Provides maximum control and speed in Canik® Rival/Mete® pistols for a competitive edge.
CANiK
Rise to the Top
Starting stages with a tabled pistol can make it challenging to get a grip, so we’ve given you a hand. Unloaded (without magazine), the ledge wedges a lightened polymer pistol grip into the air for unobstructed grabbing, leaving the competition grounded. Inserting a loaded magazine drops the grip back down and shields the OEM extended magazine release button from being pressed by raising it off the table. (*shown and weighted with Lok Grips brand brass backstrap)
RECOIL CONTROL FOR
GLOCKS
USPSA Approved
“Are you ready?” for clearing stages faster than ever with your GLOCK®? Upgrade to the ultimate performance components for the NEW USPSA Limited Optics, as well as Limited, Limited 10, and Open divisions.
Secure Design
The Thumb Rest Trigger Pin utilizes a patented forked design that leverages the disassembly channel's (opening) as an insertion point for accepting an anti-rotation stop. Pushing the trigger pin partially out (of an UNLOADED PISTOL), allows the anti-rotation stop to clear the disassembly channel so the slide lock can be pulled down for normal disassembly.
CANiK
Compatibility
We've enhanced the product line with two key features to determine compatibility: Groove (DEPTH) on the trigger pin, and (DISTANCE) between the trigger pin to the opening in the slide lock disassembly channel.
Legacy GEN 1-4 COMPACT models & current GEN 5 (including all models that utilize an ambidextrous slide stop) share the "SHORT" distance, while differing in groove depth. (NOTE: Shadow Systems use the SHORT distance for all models).
Legacy GEN 1-4 STANDARD & COMPETITION models uniquely use the "LONG" distance.
The Align Tactical® THUMB REST TAKEDOWN LEVER is compatible with Smith & Wesson® M&P M2.0® pistols only, Metal and Polymer versions in 9/40/10mm/.45ACP (including Competitor series). Hardened S7 tool steel part finished in Black Oxide. Approved for USPSA Production and Carry Optics. Thumb Rest Made in USA with lifetime warranty. Trigger Pin with built-in anti-rotation stop included.
Not compatible with original M&P 1.0 versions or any SHIELD models (including Shield M2.0)
*Holster selection requires clearance for extended ledge.
USPSA Production Approved
“Are you ready?” for clearing stages faster than ever with your M&P M2.0®? Upgrade to the ultimate performance components for USPSA production* class and above.
*Per Section 21.6 - Exchange of minor EXTERNAL components, our takedown lever received USPSA NROI validation under the classification and definition of approved “pins” being comprised of a cylindrical shaft that traverses through the pistol to hold things together, such as the slide assembly to the lower.
**IDPA International body validated for ESP and Carry Optics Divisions
Ergonomics
Establishing a two-handed grip creates a naturally angled cant of one’s support hand thumb. Incorporating a secondary receiving slope of 15 degrees allows for evenly distributed thumb pressure and serves as a guide for settling into proper contact position (with the thumb print pressed flat onto the rest).
SIG P320
USPSA Production Approved
“Are you ready?” for clearing stages faster than ever with your P320®? Upgrade to the ultimate performance components for USPSA production* class and above.
*Per Section 21.6 - Exchange of minor EXTERNAL components, our takedown lever received USPSA NROI validation under the classification and definition of approved “pins” being comprised of a cylindrical shaft that traverses through the pistol to hold things together, such as the slide assembly to the lower.
**IDPA International body validated for ESP and Carry Optics Divisions
Rise to the Top
Starting stages with a tabled pistol can make it challenging to get a grip, so we’ve given you a hand. Unloaded (without magazine), the ledge wedges a lightened pistol grip into the air for unobstructed grabbing, leaving the competition grounded. Inserting a magazine drops the grip back down and shields the OFFSET Extended Magazine Release from being pressed by raising it off the table.
Magazine Release Refined
The Align Tactical® OFFSET EXTENDED MAGAZINE RELEASE allows the operator to rest their middle finger flush across the lower half of where the Sig Sauer® P320 (M17/M18)® magazine release’s triangular bottom edge would be, eliminating side-finger chafing when choking up high on the pistol grip for increased recoil control. Ergonomically designed with an enhanced and extended engagement surface closer to the thumb, for minimizing/eliminating pistol shifting in-hand when reaching to eject magazines.
A Perfect Match
Upgrade to a performance release that naturally complements your P320® grip module with distinctive styling, factory-matched Black Oxide finish, and stringent dimensional tolerances that guarantee a drop-in fit. *OEM vs Offset
Stair-Step Design
Our patented "stair-step" design began by reshaping the lower-half of the magazine release's button to be flush with the surrounding grip module. Reducing surface area alone would focus pressure on the thumb during actuation, so we relieved it by creating an expanded ledge for an OFFSET button to extend from. Positioned for comfort in the support palm of a two-handed grip and optimized to enhance usability, this is a performance release done right.
Reduced Reach
Increased leverage helps maintain a firing grip without having to shift the pistol in-hand during reloads. An enlarged button surface protrudes 2mm (0.08") farther and is relocated higher up the grip module to provide positive engagement while reducing thumb travel.
